display | more...

The Mil-Dot Reticle is a targeting system that was created for extremely long-range snipers (primarily military, but target shooters have begun to use them too). Shooters can use the Mil-Dot Reticle to find out the range to a target of a known size. Using the range, the snipers can then accurately adjust for elevation and windage. The reticles used in the United States Marine Corps (UMSC) have small, oval-shaped dots spaced every one milliradian along the axes of the reticle. This spacing allows for the shooter to divide the reticle up into easily identifiable eighths of a milliradian.

#### Using the Mil-Dot Reticle

In order to find out the range to a target, the shooter must measure the height of the target in milliradians, using the sight, and then convert that measurement through a series of calculations to a corresponding distance to the target. For example, lets assume that a shooter estimates that a target is 6 feet tall (72 inches) and needs to know the range to the target in order to make a accurate shot. Then, the shooter would put the top of the target in middle of a mil-dot and then measure how far the target extends down the vertical axis of the scope. Let's say that it goes five-eighths of a milliradian. Using the calculations for the Mil-Dot reticle the shooter would know that the target was 3200 yards away (about 1.65 miles) and could then adjust accurately for elevation and windage.

||||
||||
||||
||||
||
||
||
||
||||
||||
||
||
||
||
||||
||||
||
||
||
||
|||||||||||||||||||======||||||||======||||||||======||||||||====== || ======||||||||======||||||||======||||||||======|||||||||||||||||||
||
||
||
||
||||
||||
||
||
||
||
||||
||||
||
||
||
||
||||
||||
||||
||||

#### Mil-Dot Mathematics

The calculations used to find distances to and heights of targets are as follows:

tan(milliradians / 1000) = Height of target / (Distance to target * 36)

The number of milliradians is read off of the reticle. The height of the target is the unknown and the distance to target is known (100 yards). The number of milliradians is divided by 1000 to convert the calculator from radians mode to milliradian mode. The distance to target is multiplied by 36 to convert yards to inches. Now, for example, lets put in 1 milliradian and 100 yards into their variables. The equation now looks like this:

tan(1 / 1000) = Height of target / (100 * 36)

tan(.001) = Height of target / 360

.001  =  Height of target / 360

Height of target  =  3.600 inches

These calculations mean that if a target occupied one milliradian at one hundred yards, then the target must be 3.6 inches in height. However, long range military snipers do not usually fire at a known distance, so they use this equation:

(((Height of target in feet * 12) / Number of milliradians) / 3.6) * 100 = Distance to target

To find the distance to a target of a known height. For example, if a sniper is taking a shot on a target of six feet and the target occupies two milliradians, then:

(((6 * 12) / 2) / 3.6) * 100) = Distance to target

((72 / 2) / 3.6) * 100) = Distance to target

(36 / 3.6) * 100) = Distance to target

10 * 100 = Distance to target

Distance to target = 1000 yards

This means that the target is 1000 yards away and now the sniper can adjust his scope for elevation and windage. The Mil-Dot reticle can accurately determine the distance to a target and therefore make the success rate of shot increase many times over.

Sources:

I got most of my information from two very useful websites:

• http://mildot.com/reticle.htm

• http://www.snipercountry.com/Articles/MilDot_MOA.asp

Log in or register to write something here or to contact authors.