display | more...
Answer to old chestnut: 15 wires:

He only needs to walk the length of the building twice.

First, he ties together the ends of the wires at the end where he is now into five groups: one with five wires, one with four, one with three, one with two, and one wire alone.

Next, he goes to the other end of the building and tests the continuity of many pairs to determine which ends there are part of each group. He labels them, for instance, 5A, 5B, 5C, 5D, 5E for the five wires that were tied together at the other end. Then, before he leaves this end, he ties together all the As, all the Bs, etc. -- each bundle contains wires from different bundles at the other end.

Back at the first end, now he unties these ends but labels them as to which group (1, 2, 3, 4, or 5) they were part of. He then uses the tester to determine which group (A, B, C, D, E) each wire is now part of at the other end, and by combining these two bits of information he can put the correct labels on the wires at this end.

If he needs to restore the wires to their original, unconnected state he'll need to make another trip to the other end to untie them.

Log in or register to write something here or to contact authors.