display | more...
Degaussing is the process of removing, or at least randomizing, the magnetic fields of a given medium or material. An electromagnetic coil is used to put a much stronger field through the material than it already has. This forces the atoms to realign from their old magnetic field to this new one. When the field is moved, some atoms follow its movement and some do not, leaving the material's overall magnetic field in a fairly random state.

One reason an object will have a problematic magnetic field in the first place is because it has been influenced by the earth's own magnetic fields. When this happens in computer monitors it can cause the electron guns to become misaligned, so the screen is blurry and discolored. Very old monitors (and TV's, for that matter) had to be degaussed by hand, by a technician who moved a hand-held coil over the screen and innards. Newer models have a button or option that discharges a capacitor into an internal coil for an instant degauss, and all modern CRT's do this every time they're turned on. The strong magnetic fields caused by using unshielded speakers near a monitor cannot be corrected by this instant degauss, so you must either have the device serviced or just ignore the problems.

Interestingly, the earth's magnetic fields will sometimes cause airplanes to become giant flying magnets. This plays havoc with their on-board compass, and makes the plane virtually unflyable. To correct this problem, a technician first removes all field-sensitive devices: computer, flight data recorders, sensors, etc. Then, the technician goes over the whole plane with a field sensor and coil, and degausses any magnetic "hot spots" on the chassis. This process is time-consuming, difficult, AND tedious, and is rightly loathed by most flight technicians.

In the case of magnetic media degaussing erases all data held by the medium, restoring it to a "like-new" state. Digital media (hard disk, floppy, tape, etc.) have to be formatted to usable again after degaussing, whereas analog media (various sizes of audio tape) do not. Degaussing is often required before businesses and the government will throw away obsolete or broken magnetic media, and the Department of Defense has strict specifications for equipment and procedure. Also, high-fidelity audio tape is very sensitive to noise, and hand degaussing can leave behind sonic evidence of how the degausser was moved over it. Because of this, any analog studio worth its salt will buy a bulk eraser with a built-in conveyer belt, to move the media through the magnetic field at a constant speed.

The onboard degauss capabilities are usually quite good in modern computer monitors, but televisions, open frame monitors, and older computer monitors often need to be degaussed manually.

Pictures tubes have a metal screen inside called the shadow mask, which is designed to aid in focusing the color guns, and is supposed to negate the effects of the Earth's natural magnetic field. But the shadow mask itself can become magnetized, which can be the cause of many image problems.

Your display should automatically degauss itself whenever it is turned on. But it seems that modern PC monitors are the only ones that have really good onboard deguass capabilities. Televisions and other displays usually only have a weak onboard degauss that is not capable of handling major problems. For example, you can usually turn a computer monitor on its side, hit the deguass button, and have a perfect picture. That will not work with a television, try it with a TV and you will get image problems every time, even with a brand new set.

If your display has colors that change in different parts of the screen, appears washed out, has color blotches, or rainbows then it needs to be degaussed manually. Manually degaussing a screen can also usually fix damage caused by people with magnets.

To manually degauss a monitor you will need a tool called a Degaussing coil. They cost about $40 to $50 and don't require any skill to operate. To use one you simply turn it on, and move it towards the center of your screen. Then move it around in front of the screen in slowly widening circles until you are covering the whole screen. Then move it away from the screen while maintaining that circular movement. Turn it off, and you will be good to go. It is generally a good idea to degauss a screen whenever you move it, so make sure your screen is already where you want it before you start.

Degauss coils are available from many online vendors, and your local television repair shops may also carry them. They look like a round plastic hoop about a foot in diameter.

Log in or register to write something here or to contact authors.