display | more...

Modular synthesizers were the first type of electronic sound synthesizer created, and they are still unique in many ways. Modular synthesizers are constructed of many building blocks of sound, called "modules". The modules consist of various analog components that either create or alter sound waves. There are two types of signals present in a modular system. The first type are "control voltages". These are signals of various voltage that tell the modules what to do. Control voltages could be used to control the pitch of the note, the gate (when the note starts and ends), or any number of parameters such as filter cutoff or LFO frequency. The other type of signals are "audio signals". They consist of the actual sound waves, and can be listened to (as opposed to control voltages, which would be silent). Modules are connected with patch cables that route the sound output or control output of the modules to and from each other.

Most modular synthesizers are monophonic, meaning they can only make one note at a time. Technically, one could make a polyphonic modular, but it would be enormous, and programming a single patch could take days. Modulars are traditionally controlled by a keyboard, but the vast array of knobs and sliders are what give the modular its power. Modulars are more tweakable than traditional analog synths. The patch cables allow the programmer to do wild and crazy things with sound outputs-- one can alter any signal with any module in a modular system. The classic image of a modular system is one of a scientist in a lab coat. He (or she) stands in front of a veritable wall of knobs, moving wires in and out of their sockets.

The first practical and widely used modular synthesizer was the Moog modular, constructed by Robert (Bob) Moog. Moog built his first modular systems in the early 70s, and they were quickly adopted by any artist who wanted new sounds-- everyone from mainstream rock bands to avant garde composers and sound designers. The same type of people are still drawn to modulars today. Many niche manufacturers such as Doepfer, Analogue Systems, Wiard, and several others are still making full fledged analog modulars. Much more popular, however, are software synthesizers that emulate modular systems (such as Reaktor and VAZ) and hardware units, namely the Nord Modular.


A short list of analog modules

VCO -- Voltage Controlled Oscillator
VCF -- Voltage Controlled Filter
VCA -- Voltage Controlled Amplifier
LFO -- Low Frequency Oscillator
ADSR -- Envelope
S&H -- Sample and Hold
Ring Modulator
Noise Generator
MIDI to CV Converter (Modern units only)

There are many others, but these are the most common.

Not all synthesizers are small devices comprising a keyboard and a bunch of knobs, containing a set path to route the audio from the oscillator to the filter then the amp and finally out of the speaker socket, all housed in a single box. Some synthesizers are modular, giving you the freedom to link together whichever parts of it you want.

Put simply, if synthesizers were toys, modular synthesizers would be Lego. They're harder to use at first, but once you learn how the different building blocks fit together, you can create anything your imagination and budget allow for.

Examples of modular synthesizers:

Typical modules:

  • Oscillator This makes the initial sound
  • Noise This makes harsher sounds by giving a random output
  • Filter This takes away certain frequencies and boots others, giving the sound a unique character
  • Attenuator This makes the whole thing quieter
  • LFO This is a very slow oscillator, usually too slow to be audible
  • Contour Generator Also known as an envelope generator, this produces an output that can slowly increase and decrease over time, but not periodically like an LFO
  • Sample and Hold This samples its input periodically, and constantly outputs that sample

Linking them together

Modular synths are always more than the sum of their parts, because any part of them can be linked to any other part in various different ways. Using just the basic building blocks listed above, you could create a variety of different sounds.

For example, we could link the LFO's output to the oscillator's frequency input. That would make "woo-woo-woo" noises like in old arcade games as the oscillator is told to constantly raise and lower its pitch. Not a bad starting point.

A more practical approach would be to hook up a keyboard to the oscillator's frequency input, and link the trigger and gate outputs of the keyboard to a contour generator, such as one that might produce an ADSR envelope. Whenever you play a note, the oscillator will start to output at the correct frequency, and the contour generator will start to run through its course. Then you can just connect the contour generator's output to control an attenuator, and link the oscillator's output to the audio input on the same attenuator, and you've got a very basic synthesizer that will actually play the notes you want it to. When you press a note, it will quickly rise to the maximum volume at the correct pitch, then fall to a more comfortable volume until you take your finger off the key, at which point it wall fall to silence.

Then you could add a filter in between the oscillator and attenuator, and control its cutoff point with another contour generator, say one that simply decays from a certain starting point to zero. Then you can connect the keyboard's trigger output to that contour generator (you'll need another module to split it into two different outputs so that it can still be plugged into the other contour generator at the same time), and then you're getting into acid line territory if you have the filter's resonance turned up.

Everything is multi-purpose

Being able to link things together in any way you want to gives you much more freedom than you'd first realize, if you're used to hardwired synthesizers that have set ways of routing everything. For example, a synth with two oscillators can use them both to produce the same note, only with one an octave up than the other one to produce a fatter timbre. Most synths let you do that. They probably don't let you use the output of one oscillator to determine the frequency of the other one, going beyond vibrato to open up a whole new method of synthesis - FM synthesis. The point here is that just because an oscillator's output is audible and melodic sounding, it doesn't mean it has to be used as audio. It can be used to control something else.

As another example, white noise is audible and is the starting point for some percussive sounds. Instead, though, you could use it in conjunction with a sample and hold module to output a different random voltage at a set interval. That could be fed into an oscillator's frequency input to produce the cheesy "bleep-bloop-bliip" sound that computers were supposed to produce in old sci-fi shows.


Another main advantage is expansion. With a hardwired keyboard, you have to buy it all at once. If you decide it would sound better with another oscillator in it later on, you can't very easily take it apart and solder a new one onto its circuit board. With modular synths, however, it's quite possible - even the standard approach - to start off with a handful of modules and buy new ones whenever you feel the desire and have enough money, or to sell modules you don't find yourself using any more.

Note that all of the above examples are of some relatively very simple patches. Now picture a whole wall covered in hundreds of these modules and imagine the possibilities of how they can all affect each other.

Modular synths versus hardwired synths

Modular synths aren't for everyone. If you want to turn on a machine and immediately have access to many different instrument sounds, you'd probably be better off with a workstation such as the Korg Triton LE. If you want something that sounds realistic, you might prefer a sampler such as any by Akai. If, however, you want to understand the underlying principles of subtractive synthesis and be limited only by your imagination, modular synths can be as versatile as you need. They're distinctly artificial sounding, but with enough patience you can coax some wonderful sounds out of them.

And people thought that Wendy Carlos was cheating by pushing a few buttons to make the synthesizer do all the work...

Log in or register to write something here or to contact authors.